2.652MWh Mobile BESS EV Charging Station
The Polinovel 2.652MWh Mobile BESS EV Charging Station brings large-capacity battery power to fleet depots, construction sites and temporary charging locations. Combining 2652.6kWh of LFP storage with 1250kVA rated AC power, this semi-trailer mobile battery energy storage system supplies connected EV charging equipment and other site loads where grid access is limited.
Grid-connected and off-grid operation, including off-grid black start, provide flexibility across deployment conditions. Intelligent liquid cooling manages battery temperature, while PACK-level detection and cluster-level fire suppression support system protection. Vibration-resistant construction supports transport between sites, and local controls with 4G remote monitoring keep operating information accessible.
Optimized for Your Energy Needs
Built for Relocation
A semi-trailer configuration supports deployment across changing project locations. Multiple vibration-resistant design measures for the battery modules, racks and enclosure help protect key components during transport.
Grid & Off-Grid Power
Support grid-connected charging and discharging, or supply external loads independently in off-grid mode. Off-grid black-start capability helps establish site power when an external AC supply is unavailable.
Intelligent Liquid Cooling
An integrated liquid-cooling system manages battery temperature during charging and discharging. Intelligent thermal control supports the operating needs of a large-capacity mobile battery system.
Targeted Fire Protection
PACK-level detection monitors battery conditions close to the source, while cluster-level fire suppression provides a targeted response within the battery system. This arrangement brings detection and suppression to specific battery sections.
Local & Remote Monitoring
Access system information through a configurable local operator interface, or upload operating data to a cloud platform over 4G. Remote monitoring supports status checks and operational analysis between site visits.
Outdoor-Ready Enclosure
An IP54 enclosure and C3 corrosion protection support outdoor deployment. The specified operating temperature range of −20°C to 55°C accommodates projects across varied site conditions.
Specification
Battery Parameter
| Model | MBS2652 |
|
Battery type
|
LFP
|
|
Cell Capacity
|
3.2V314Ah
|
|
System Battery Configuration
|
10P264S
|
| Rated Battery Energy |
2652.6kWh
|
| Rated System Voltage |
844.8V
|
| System Voltage Range |
739.2~950.4V
|
| Charge/Discharge Rate |
0.5C
|
|
Charge and Discharge Depth
|
95%
|
| Battery Cooling Method |
Liquid Cooling
|
AC Side Parameter
|
Rated AC power
|
1250kVA
|
|
Allowable Grid Voltage
|
380/400(-15%~15%)Vac
|
|
Permissible Grid Frequency
|
50/60Hz
|
|
Total Current Harmonic Distortion Rate
|
≤3%
|
|
Power Factor
|
0.99/-1~1
|
System Parameters
|
Size (L*W*D)
|
6058*2438*2896mm
|
|
Weights
|
26T
|
|
Protection Level
|
IP54
|
|
Anti-corrosion Grade
|
C3
|
|
Operating Temperature
|
-20~55℃
|
|
Operating Humidity
|
0~90% (no condensation)
|
|
Storage Temperature
|
-30~60℃
|
|
Operational Altitude
|
≤2000m
|
| Battery Thermal Management |
High-efficiency intelligent liquid cooling
|
| Fire Protection |
PACK level detection, cluster spraying
|
| Communication |
CAN/Modbus
|
Hot Tags: 2.652mwh mobile bess ev charging station, China 2.652mwh mobile bess ev charging station manufacturers, suppliers, factory
