97–193kWh Mobile Energy Storage EV Charger
The 97–193 kWh Mobile Energy Storage EV Charger is designed for EV charging projects with varying energy and power requirements. Its three model configurations provide greater flexibility in matching battery capacity and DC charging power to different project scales and operating demands.
Combining battery storage and DC fast charging in one mobile unit, the system supports temporary charging sites, fleet operations and changing project locations. It is also peak-shaving ready, helping operators manage site power demand and make better use of available electricity.
Key Features
Built around high-capacity LFP cells, multiple battery configurations, and model-matched power systems.
High-Capacity LFP Battery Storage
Built with 314Ah LFP cells, offering energy capacities of 96.4 kWh, 144.6 kWh and 192.9 kWh for different charging demands.
Flexible Power Configuration
Each model combines a corresponding battery voltage and DC charging output, with configurations ranging from 307.2V / 60kW to 614.4V / 120kW.
Wide-Range DC Charging Output
Supports a 200–1000V DC output range, accommodating different electric vehicle battery voltage requirements.
High-Efficiency Power Conversion
Achieves over 95% DCDC conversion efficiency for efficient energy transfer between the battery system and charging output.
Dedicated AC Cooling System
Uses an AC cooling system to manage heat within the integrated battery and charging equipment during operation.
Enhanced Protection and Durability
Combines IP54 enclosure protection, IK10 impact resistance, multiple electrical safeguards and a battery cycle life of at least 6,000 cycles.
Specification
|
Battery Parameter |
|||
| Model | MBS97 | MBS145 | MBS193 |
| Rated Energy Capacity | 96.4 kWh | 144.6 kWh | 192.9 kWh |
| Nominal Voltage | 307.2 V | 460.8 V | 614.4 V |
| PACK Parameters | 48S 2P | 48S 3P | 48S 4P |
| Rated Voltage/Capacity | 3.2 V / 314 Ah | ||
| Battery Type | Lithium Iron Phosphate (LFP) | ||
| System Interface & Functions | |||
| Charger Connector | CCS1 / CCS2 / GBT / CHAdeMO / NACS | ||
| Display | 7-inch Touch Screen | ||
| Cable Length | 5 m | ||
| Electrical & Power Performance | |||
| Output Power | 60 kW | 80 kW | 120 kW |
| Output Voltage | 200–1000 V | ||
| DCDC Conversion Efficiency | More than 95% | ||
| DC Input Voltage | 307.2 V | 460.8 V | 614.4 V |
| System Recharge | DCDC Recharge Port | ||
| Mechanical & Physical | |||
| Dimensions | 1834 × 852 × 1395mm | 1826 × 854 × 1395mm | 1903 × 960 × 1500mm |
| Weight | 1200 kg | 1450 kg | 1900 kg |
| Cooling Method | AC Cooling | ||
| Installation Type | Mobile | ||
| Safety & Protection | |||
| Protection Class | IP54 | ||
| Impact Protection | IK10 | ||
| Electrical Protection | Over/Under Voltage, Over Current, Short Circuit, Reverse Polarity, Insulation Monitoring, Ground Fault Protection, Surge/Lightning (SPD), Emergency Stop, Thermal Protection | ||
| Soft Start Time | 5–10 s | ||
| Compliance & Reliability | |||
| Standard | IEC / CE / UN 38.3 | ||
| Battery Cycle Life | ≥6,000 Cycles | ||
| Charger Warranty | 2 Years | ||
| Environmental Conditions | |||
| Work Temperature | -10°C to +55°C | ||
| Work Humidity | 5%–95% | ||
| Work Altitude | ≤2,000 m | ||
Hot Tags: 97–193kwh mobile energy storage ev charger, China 97–193kwh mobile energy storage ev charger manufacturers, suppliers, factory
